Weather Alert

MnDOT stop bar project nearly complete in KLGR-area counties

Image courtesy MnDOT

A districtwide stop bar project is nearly complete in Southwest Minnesota District 8, which includes Chippewa, Kandiyohi, Lac qui Parle, Lincoln, Lyon, McLeod, Meeker, Murray, Pipestone, Redwood, Renville, and Yellow Medicine counties. Stop bars, also known as stop lines, are 24 inch-wide, solid white lines that extend across all lanes in one direction to indicate where to stop.

In Minnesota, stop lines are placed between 30 and four feet from the nearest edge of the intersecting roadway. Stop lines provide drivers with an additional visual reminder to stop before entering or crossing traffic at an intersection. The project included moving stop bars closer to numerous highway intersections throughout the district to enhance safety. Red reflective strips were also installed on some stop sign posts to make them more noticeable.

Why were stop bars moved?

The stop bars were placed closer to the intersection to provide drivers:

  • Better sight lines
  • Shorter crossing or merging distances
  • Shorter crossing or merging times

In addition, stop bars are easier to see from other legs of the intersection so that drivers can more easily identify an intersection’s traffic control, such as a two-way stop versus an all-way stop.

Where should drivers stop?

At intersections where the stop line was moved, drivers should come to a complete stop prior to the new stop line. Per state statute, drivers are required to stop at a stop sign, or at a clearly marked stop line. Due to the characteristics of each location, the stop sign may not be in exact alignment with the stop bar.

Additional project information

During installation, most of the old stop bars were removed before the new lines were painted; however, crews still need to remove the old stop bars at a few locations to complete the project. The old stop bars were removed by water-blasting into the pavement, which can change the color of the pavement surface. The different color will oxidize and become less noticeable over time, and the rough surface will improve as it is worn down by snowplow blades.

The project got underway July 19. The cost was $74,000, and NTTK, Inc., was the contractor.


Connect With Us Listen To Us On